Both the Landing Pad 6 and 7 and are used for custom applications. The difference is the type of mounting hardware each has.
Landing Pad 6 is used in caps, or other applications where you can gain access to the bottom of the roof, these use a "cap nut".
Landing Pad 7 is used on sheet metal applications such as the roof of a car where you you cannot easily access the bottom of the roof. These use a "Blind" fastener and should only be used in sheet metal. Please note, the LP7 is is only rated to 100lbs.
The dimensions are the same for both the Landing Pad 6 and 7
Weight: ¾ lb. per pair
Height: 4-¼ in. from base of Landing Pad 6 to top of crossbar.
Mounting hole spacing: 95.25 mm (3.75") C-C
Width: 1.75" at widest point
With either the of the above Landing Pads you will use the SkyLine tower.