The Q-Tower is the only approved rack for this car, no strap (trunk) racks will work on it. The 2018 has not yet been fit.
Rear Clip: Q116 Clips
Fairing: 40" WindShield
M1: 36 "
M2: 5 "
M3: 36 "
M4: 18 "
Weight Limit: 100 lbs
Loads: Bikes and skis only
The roof, rubber/chrome door seals and/or trim may deform or be damaged under prolonged contact with any roof rack towers and/or clips. Do not over-tighten or overload the rack. Remove rack when not in use.
For a secure fit, pull down door frame seals enough to insert the clip against underside of raingutter, trim, and/or roof.
The clip fits tightly between the window and the door frame. Open/close your doors carefully to prevent window contact.
All loads extending beyond the length of the roof (except cargo boxes) must be secured to both the front and rear of the vehicle, in addition to the rack.
SideWinder (Tandem Bike Mount) will not work due to crossbar spread limitations.
Check clips after installing. Grab each clip and try to pull them hard away from your vehicle, twice. If the clip moves after the second pull, tighten the adjustment post. If the clip still moves after the second pull, recheck your measurements between the towers and adjust if necessary. Check clip again.
Load/Mount will prevent rear hatch from opening fully. Use caution to prevent damage.
This fit requires the use of current generation Q Tower (4 Pack PN 8000124 or 2 Pack PN 8000135). Contact your local dealer if you have questions or call Consumer Service at 888-925-4621, Option 2, from 7am-5pm Pacific Time M-F.
Due to unique vehicle characteristics such as wheel base, height, and/or overall proportions, any load carried on the roof may have adverse effects on driving dynamics. Exercise caution when operating this vehicle with any load on the roof.
Boa and ForkChop bike mounts will not work on this application due to crossbar spread limitations.