Which Upright Bike Mount do I have, and what parts are available? ?

The following is a listing of our Upright style bike mounts. Racks are listed in chronological order. Common replacement parts are list for each. More parts as well as instructions can be found by clicking here, then selecting "Product Technical Info" and entering either the product name or part number.

Can't find what you are looking for, or have other questions, contact us here, or by phone at 888-925-4621 M-F from 7 to 4 PT

GT Upright (PN 8002005) Made 1987 to 1998. Fit bikes with a 1" or less diameter down tube. Non-Locking, replaced by the LockJaw

LockJaw (PN 8002037) Made from 1998 until 2002. Fit bikes with a down tube diameter of 1" to 2 1/8, not for use on carbon frames.

Common Replacement Parts:

8820036 - Locking Lever

8820110 - Wheel Tray

8820112 - Rattler Strap

8810135 - Snap Around Set (4)

8880010 5/15 x 2 1/4 Bolt Set (4)

8820084 - Short Bolt

8820028 - Long Hex Key (1)

AnkleBiter (PN 8002025) Made 1998 -99 and AnkleBiter Deuce (8002063) Made 1999 to 2003. Mount held bike by the crank arm. Works with MightyMounts, but not the Universal MightyMount.

Common Replacement Parts:

8820091 - AnkleBiter Lock Assembly

8820110 - Wheel tray

8820093 - Snap Arounds w/ bolts (4)

8820112 - Rattler Strap

Cobra (PN 8002083) and King Cobra (PN 8002084) Made from 2002 to 2010. Difference between the two models, was that the King Cobra came with a locking cable built into the rear loop. Both fit bikes with wheels between 20 and 29". Compatible with MightyMounts.

Common Replacement Parts:

8880115 - Wheel tray

8820112 - Rattler Strap

8820084 - Short Bolt

HighRoller (PN 8002091) Made 2006 to 2012 silver / gray finish. PN 8002107 made 2012 to 2017 black finish. No functional differences between the two models. Fit wheel sizes 20 to 29" and to 3" wide tires. Max bike weight of 50 lbs.

Common Replacement Parts:

8880077 - Wheel Strap

8880078 - Wheel cradle

8880109 - Cover

8880117 - End cap

8880110 - Mounting hardware

Raptor (PN 8002085) made 2003 to 2013 and Raptor Aero (PN 8002093) Made 2007 to Present. Replaced the LockJaw holds bike by the down tube. Fit frames with a diameter of 1 to 3", safe to use on carbon frames. Difference between the two mounts is that the Raptor Aero came with a Universal Mounting bracket which allowed use on round or factory cross bars right out of the box.

Common Replacement Parts:

8820181 - Locking knob

8820093 - Roundbar mounting hardware

8820084 - Short bolt

8820110 - Wheel tray

8820183 - Hoop Assembly

8720026 - C-Clip

8820112 - Rattler Wheel Strap

8880057 - MightyMount pad Set

8880054 - MightyMount Lower Jaw

FrontLoader (PN 8002103) Made 2010 to Present.

2011 (Feb) - Addition of Stability Plate to front wheel tray for improved bike retention. Stability Plate is not retro compatible with previous FrontLoader models. Installing Stability Plate to a pre Feb 2011 model could result in a dangerous condition. These units where subject to a recall, for more information go to http://flrecall.yakima.com/.

Fits bikes with wheels sizes of 20" to 29" with max tire width of 3". Max bike weight of 40 lbs.

Common Replacement Parts:

8880191 - Standard length wheel strap

8880229 - Long Wheel strap

8880188 - Endcap

8880137 - Rear wheel cup (red button)

8880845 - Rear wheel cup (grey Button)

8880208 - Rear clamp assembly

8880190 - Tensioning handle

Highroad (PN 8002114) 2017 - Present. Fits tire size 26" - 29" and widths 23mm up to 3.25". Comes with one rear strap, 300mm (12") length.